Monday, January 6, 2020

3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal Machine

3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal Machine
3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal Machine3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal Machine3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal Machine



Feature:
1. This double-loop electric shaver allows you to clean faster, easier, and more efficiently. The head can be evenly leveled against the contours of the face, and it is close to the face, giving you a more comfortable face when shaving.
2, blade automatic grinding blade network. When the razor is in operation, the blades and the hard alloy mesh cover are continuously ground and can always keep the blades sharp.
3. This section for the first time, please charge 8 hours before use. If you don't use it for a long time, be sure to charge 8 hours before use, to ensure that the rechargeable battery does not lose power, maintain battery capacity, this can be Ting long shaver life.
4. The razor battery (1.2V) is recharged 500 times and the capacity remains the same.
5. This razor is a high speed motor, long life, low noise, high power, light vibration.

Specification:
Type: 4D Shaver
Size: 6.30in/16cm*2.31in/58.7mm
Rated Voltage: AC220V 50HZ
Rated Power: 3W
Charging Time: 8h
Style: 3in1
Using Time: 60min
Feature: Wet/Dry Shaver
Plug: EU/US Plug

Package included:
1x 4D Shaver
1x Charging Cable
1x Brush


[Shaver Tips]:
1. The cutter head should be thoroughly cleaned once every four weeks. After removing the omentum frame, a special cleaning agent should be sprayed at a distance of 5 cm from the net rack. Afterwards, a small brush can be used to remove the residue and dirt in the cutter head.
2. The cutter head is cleaned with a small brush, and the brush is cleaned with a small brush to prevent damage.
3. After the shave is finished, remove the omentum frame and tap it on the plane for a few more times before reinstalling it.
4. Cover the protective film on the back of the screen after each use to prevent damage to the membrane.
5. In order to ensure the high level of efficiency of the electric blade, it is particularly recommended that you replace the cutter head and blade net every two years.
6. in order to maintain the battery life of the machine, the razor will be fully discharged in normal use every six months or so, and then recharge.
7. Because the back of the face will be slightly expanded, so it is best to shave before washing your face, before getting up in the morning before washing your face is an ideal time for shaving.
8. When using a mesh shaver, keep the shaver perpendicular to the face and hold the blade at a 90-degree angle.
9. Because the beard is growing down, the reverse scraping can make the scum stand upright, easy to scrape clean, so shave from the bottom up to scrape.
10. When you shave, use your hand to tighten the skin. Do not push the cutter head vigorously. You can shave off the shavings by gently sliding over the area.

[Charging Method]:
1, be sure to use the AC 220V/50Hz charge
2. Turn off the switch, push out the charging pin, and insert it into the power socket.
3, when the switch is not closed, it cannot be charged.
4, when charging, charging indicator light.
5, the standard charge time is 8 hours.
























3 in 1 Multipurpose 4D Electric Shaver Rechargeable Low Noise Wet Dry Shaver Razor Beard Hair Removal MachineSee detail